|Drive Wheels||14" Solid|
Optional: 14" Pneumatic
|Caster Wheels||Front: 6" Solid|
Rear: 6" Solid
|Maximum Speed4||Up to 6 mph (Optional: 8 mph)|
|Ground Clearance||3.5" (caster arm)|
|Overall Length||36" without foot riggings|
|Seating Sizes||TRU-Balance® 2|
Synergy®/Static: W: 10-24" D: 10-24"
Power Tilt: W: 14-24" D: 14-24"
Lift & Tilt: W: 16-20" D: 16-20"
|Seat-to-Floor Heights||TRU-Balance® 2|
Power Tilt8: 18.375-20.375" (16.5” w/ Super Low11)
Lift & Tilt8: 20-22.625" (18” w/ Super Low11)
|Battery Size6||NF-22 or Group 24|
|Battery Weight14||38 lbs. - 52 lbs.|
|Available Electronics12||75A Q-Logic 2 NE|
75A Q-Logic 2 NE+
100A Q-Logic 2 EX13
|Battery Charger||8A Off-board|
|Motor Packages||4-Pole 6 mph1 or 4-Pole 8 mph2|
|Weight Capacity7||300 lbs.|
|Base Weight||147 lbs.|
|Medicare Code Coverage||Group 3:|
Single Power (K0856/K0857)
Multiple Power (K0861)
3Requires HD Suspension
4Speed varies with user weight, terrain type, battery charge, battery condition and tire pressure.
5Without front riggings
6Battery capacity may change when adding power positioning systems.
7Weight capacity is dictated by the selection of seating.
8All measurement +/- 1/8" with 18" x 18" seat, fixed towers, 300 lbs. weight capacity and solid tires (add 3/8" with pneumatic tires). Widths may increase seat-to-floor height. Contact Customer Service for details. Limited measurements are in the lowest position; does not include elevating system unless specified.
9250 lbs. weight capacity with TRU-Balance® Systems
10The Synergy® Manual Tilt weight capacity is 75 lbs. and maximum dimensions are 14"W x 14"D. Maximum dimensions of the Manual Recline vary by power base and seating system. Call for details.
11Requires Group 34 batteries
12All Quantum Rehab® units can be ordered with specialty controls
13Required with high-speed motors
14Battery weight may vary +/- 3 lbs. based on manufacturer.
15Weight capacity is reduced to 400 lbs. with the 10" Lift.
The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice.